Parts List - Temperature Sensor Project

The Sensor & Sensor Assembly

  • TMP36 Low Voltage Temperature Sensor
    SparkFun SEN-10988
  • 0.1 μF ceramic capacitor -- generic
  • 750Ω resistor -- generic
  • Cat4 cable -- generic

  • 1/4" copper pipe -- Lowe's
  • 1/2" copper pipe cap -- Lowe's
  • 1/2" PVC pipe -- generic

The Project Box & Hardware

  • Ballqube Softball Display Cube -- 4 1/8"
    The Container Store sku #44070
  • M2x16 (5/8") bolts w/washers -- generic
    4x -- to mount LCD
  • 4-40 bolts w/washers -- generic
    4x -- to mount Arduino
  • LED Panel Mount Clip -- 5mm
    SparkFun COM-11840

The Electronics -- Arduino Layer

  • Arduino Uno-R3 -- SparkFun DEV-11021
  • Wall wart -- generic -- 7v-12v recommended.
    Barrel connector is 2.1mm in diameter.
    Center pin is positive.
    Outer sleeve is grounded.

The Electronics -- Input Board

  • Arduino ProtoShield -- SparkFun DEV-13819
  • Stackable Headers -- generic
    2x -- 6 pin
  • Stackable Headers -- generic
    2x -- 8 pin

The Electronics -- Output Board

  • Arduino XBee Shield -- SparkFun WRL-12847
  • Stackable Headers -- generic
    4x -- 6 pin
  • Stackable Headers -- generic
    4x -- 8 pin

  • Logic Level Converter -- SparkFun BOB-12009
  • LED-Red with Resistor 5mm
    SparkFun COM-14560 (25 pack)
  • 16x2 Black on RGB Serial LCD
    SparkFun LCD-14072 (retired)
    SparkFun LCD-16396 (active)
  • Xbee Series 2 radio -- Digi International

  • JST Jumper 3 wire assembly
    SparkFun COM-09915
    2x -- to connect LED and LCD